天嵌二次封装库使用手册  V2.1.2
全部  文件 函数 变量 类型定义 枚举 枚举值 宏定义
MQTTAsync.h 文件参考

浏览源代码.

struct  MQTTAsync_init_options
 
struct  MQTTAsync_message
 
struct  MQTTAsync_connectData
 
struct  MQTTAsync_failureData
 
struct  MQTTAsync_failureData5
 
struct  MQTTAsync_successData
 
struct  MQTTAsync_successData5
 
struct  MQTTAsync_responseOptions
 
struct  MQTTAsync_createOptions
 
struct  MQTTAsync_willOptions
 
struct  MQTTAsync_SSLOptions
 
struct  MQTTAsync_nameValue
 
struct  MQTTAsync_connectOptions
 
struct  MQTTAsync_disconnectOptions
 

宏定义

#define MQTTASYNC_SUCCESS   0
 
#define MQTTASYNC_FAILURE   -1
 
#define MQTTASYNC_PERSISTENCE_ERROR   -2
 
#define MQTTASYNC_DISCONNECTED   -3
 
#define MQTTASYNC_MAX_MESSAGES_INFLIGHT   -4
 
#define MQTTASYNC_BAD_UTF8_STRING   -5
 
#define MQTTASYNC_NULL_PARAMETER   -6
 
#define MQTTASYNC_TOPICNAME_TRUNCATED   -7
 
#define MQTTASYNC_BAD_STRUCTURE   -8
 
#define MQTTASYNC_BAD_QOS   -9
 
#define MQTTASYNC_NO_MORE_MSGIDS   -10
 
#define MQTTASYNC_OPERATION_INCOMPLETE   -11
 
#define MQTTASYNC_MAX_BUFFERED_MESSAGES   -12
 
#define MQTTASYNC_SSL_NOT_SUPPORTED   -13
 
#define MQTTASYNC_BAD_PROTOCOL   -14
 
#define MQTTASYNC_BAD_MQTT_OPTION   -15
 
#define MQTTASYNC_WRONG_MQTT_VERSION   -16
 
#define MQTTASYNC_0_LEN_WILL_TOPIC   -17
 
#define MQTTASYNC_COMMAND_IGNORED   -18
 
#define MQTTVERSION_DEFAULT   0
 
#define MQTTVERSION_3_1   3
 
#define MQTTVERSION_3_1_1   4
 
#define MQTTVERSION_5   5
 
#define MQTT_BAD_SUBSCRIBE   0x80
 
#define MQTTAsync_init_options_initializer   { {'M', 'Q', 'T', 'G'}, 0, 0 }
 
#define MQTTAsync_message_initializer   { {'M', 'Q', 'T', 'M'}, 1, 0, NULL, 0, 0, 0, 0, MQTTProperties_initializer }
 
#define MQTTAsync_connectData_initializer   {{'M', 'Q', 'C', 'D'}, 0, NULL, {0, NULL}}
 
#define MQTTAsync_failureData5_initializer   {{'M', 'Q', 'F', 'D'}, 0, 0, MQTTREASONCODE_SUCCESS, MQTTProperties_initializer, 0, NULL, 0}
 
#define MQTTAsync_successData5_initializer   {{'M', 'Q', 'S', 'D'}, 0, 0, MQTTREASONCODE_SUCCESS, MQTTProperties_initializer, {.sub={0,0}}}
 
#define MQTTAsync_responseOptions_initializer   { {'M', 'Q', 'T', 'R'}, 1, NULL, NULL, 0, 0, NULL, NULL, MQTTProperties_initializer, MQTTSubscribe_options_initializer, 0, NULL}
 
#define MQTTAsync_callOptions_initializer   MQTTAsync_responseOptions_initializer
 
#define MQTTAsync_createOptions_initializer   { {'M', 'Q', 'C', 'O'}, 2, 0, 100, MQTTVERSION_DEFAULT, 0, 0, 1, 1}
 
#define MQTTAsync_createOptions_initializer5   { {'M', 'Q', 'C', 'O'}, 2, 0, 100, MQTTVERSION_5, 0, 0, 1, 1}
 
#define MQTTAsync_willOptions_initializer   { {'M', 'Q', 'T', 'W'}, 1, NULL, NULL, 0, 0, { 0, NULL } }
 
#define MQTT_SSL_VERSION_DEFAULT   0
 
#define MQTT_SSL_VERSION_TLS_1_0   1
 
#define MQTT_SSL_VERSION_TLS_1_1   2
 
#define MQTT_SSL_VERSION_TLS_1_2   3
 
#define MQTTAsync_SSLOptions_initializer   { {'M', 'Q', 'T', 'S'}, 5, NULL, NULL, NULL, NULL, NULL, 1, MQTT_SSL_VERSION_DEFAULT, 0, NULL, NULL, NULL, NULL, NULL, 0, NULL, 0 }
 
#define MQTTAsync_connectOptions_initializer
 
#define MQTTAsync_connectOptions_initializer5
 
#define MQTTAsync_connectOptions_initializer_ws
 
#define MQTTAsync_connectOptions_initializer5_ws
 
#define MQTTAsync_disconnectOptions_initializer
 
#define MQTTAsync_disconnectOptions_initializer5
 
#define MQTTASYNC_TRUE   1
 

类型定义

typedef void * MQTTAsync
 
typedef int MQTTAsync_token
 
typedef int MQTTAsync_messageArrived(void *context, char *topicName, int topicLen, MQTTAsync_message *message)
 
typedef void MQTTAsync_deliveryComplete(void *context, MQTTAsync_token token)
 
typedef void MQTTAsync_connectionLost(void *context, char *cause)
 
typedef void MQTTAsync_connected(void *context, char *cause)
 
typedef void MQTTAsync_disconnected(void *context, MQTTProperties *properties, enum MQTTReasonCodes reasonCode)
 
typedef int MQTTAsync_updateConnectOptions(void *context, MQTTAsync_connectData *data)
 
typedef void MQTTAsync_onSuccess(void *context, MQTTAsync_successData *response)
 
typedef void MQTTAsync_onSuccess5(void *context, MQTTAsync_successData5 *response)
 
typedef void MQTTAsync_onFailure(void *context, MQTTAsync_failureData *response)
 
typedef void MQTTAsync_onFailure5(void *context, MQTTAsync_failureData5 *response)
 
typedef struct MQTTAsync_responseOptions MQTTAsync_responseOptions
 
typedef struct MQTTAsync_responseOptions MQTTAsync_callOptions
 
typedef void MQTTAsync_traceCallback(enum MQTTASYNC_TRACE_LEVELS level, char *message)
 

枚举

enum  MQTTASYNC_TRACE_LEVELS {
  MQTTASYNC_TRACE_MAXIMUM = 1, MQTTASYNC_TRACE_MEDIUM, MQTTASYNC_TRACE_MINIMUM, MQTTASYNC_TRACE_PROTOCOL,
  MQTTASYNC_TRACE_ERROR, MQTTASYNC_TRACE_SEVERE, MQTTASYNC_TRACE_FATAL
}
 

函数

LIBMQTT_API void MQTTAsync_global_init (MQTTAsync_init_options *inits)
 
LIBMQTT_API int MQTTAsync_setDisconnected (MQTTAsync handle, void *context, MQTTAsync_disconnected *co)
 
LIBMQTT_API int MQTTAsync_setUpdateConnectOptions (MQTTAsync handle, void *context, MQTTAsync_updateConnectOptions *co)
 
LIBMQTT_API int MQTTAsync_setBeforePersistenceWrite (MQTTAsync handle, void *context, MQTTPersistence_beforeWrite *co)
 
LIBMQTT_API int MQTTAsync_setAfterPersistenceRead (MQTTAsync handle, void *context, MQTTPersistence_afterRead *co)
 
LIBMQTT_API int MQTTAsync_setCallbacks (MQTTAsync handle, void *context, MQTTAsync_connectionLost *cl, MQTTAsync_messageArrived *ma, MQTTAsync_deliveryComplete *dc)
 
LIBMQTT_API int MQTTAsync_setConnectionLostCallback (MQTTAsync handle, void *context, MQTTAsync_connectionLost *cl)
 
LIBMQTT_API int MQTTAsync_setMessageArrivedCallback (MQTTAsync handle, void *context, MQTTAsync_messageArrived *ma)
 
LIBMQTT_API int MQTTAsync_setDeliveryCompleteCallback (MQTTAsync handle, void *context, MQTTAsync_deliveryComplete *dc)
 
LIBMQTT_API int MQTTAsync_setConnected (MQTTAsync handle, void *context, MQTTAsync_connected *co)
 
LIBMQTT_API int MQTTAsync_reconnect (MQTTAsync handle)
 
LIBMQTT_API int MQTTAsync_create (MQTTAsync *handle, const char *serverURI, const char *clientId, int persistence_type, void *persistence_context)
 
LIBMQTT_API int MQTTAsync_createWithOptions (MQTTAsync *handle, const char *serverURI, const char *clientId, int persistence_type, void *persistence_context, MQTTAsync_createOptions *options)
 
LIBMQTT_API int MQTTAsync_connect (MQTTAsync handle, const MQTTAsync_connectOptions *options)
 
LIBMQTT_API int MQTTAsync_disconnect (MQTTAsync handle, const MQTTAsync_disconnectOptions *options)
 
LIBMQTT_API int MQTTAsync_isConnected (MQTTAsync handle)
 
LIBMQTT_API int MQTTAsync_subscribe (MQTTAsync handle, const char *topic, int qos, MQTTAsync_responseOptions *response)
 
LIBMQTT_API int MQTTAsync_subscribeMany (MQTTAsync handle, int count, char *const *topic, const int *qos, MQTTAsync_responseOptions *response)
 
LIBMQTT_API int MQTTAsync_unsubscribe (MQTTAsync handle, const char *topic, MQTTAsync_responseOptions *response)
 
LIBMQTT_API int MQTTAsync_unsubscribeMany (MQTTAsync handle, int count, char *const *topic, MQTTAsync_responseOptions *response)
 
LIBMQTT_API int MQTTAsync_send (MQTTAsync handle, const char *destinationName, int payloadlen, const void *payload, int qos, int retained, MQTTAsync_responseOptions *response)
 
LIBMQTT_API int MQTTAsync_sendMessage (MQTTAsync handle, const char *destinationName, const MQTTAsync_message *msg, MQTTAsync_responseOptions *response)
 
LIBMQTT_API int MQTTAsync_getPendingTokens (MQTTAsync handle, MQTTAsync_token **tokens)
 
LIBMQTT_API int MQTTAsync_isComplete (MQTTAsync handle, MQTTAsync_token token)
 
LIBMQTT_API int MQTTAsync_waitForCompletion (MQTTAsync handle, MQTTAsync_token token, unsigned long timeout)
 
LIBMQTT_API void MQTTAsync_freeMessage (MQTTAsync_message **msg)
 
LIBMQTT_API void MQTTAsync_free (void *ptr)
 
LIBMQTT_API void * MQTTAsync_malloc (size_t size)
 
LIBMQTT_API void MQTTAsync_destroy (MQTTAsync *handle)
 
LIBMQTT_API void MQTTAsync_setTraceLevel (enum MQTTASYNC_TRACE_LEVELS level)
 
LIBMQTT_API void MQTTAsync_setTraceCallback (MQTTAsync_traceCallback *callback)
 
LIBMQTT_API MQTTAsync_nameValueMQTTAsync_getVersionInfo (void)
 
LIBMQTT_API const char * MQTTAsync_strerror (int code)
 

宏定义说明

#define MQTT_BAD_SUBSCRIBE   0x80

Bad return code from subscribe, as defined in the 3.1.1 specification

在文件 MQTTAsync.h215 行定义.

#define MQTT_SSL_VERSION_DEFAULT   0

在文件 MQTTAsync.h1030 行定义.

#define MQTT_SSL_VERSION_TLS_1_0   1

在文件 MQTTAsync.h1031 行定义.

#define MQTT_SSL_VERSION_TLS_1_1   2

在文件 MQTTAsync.h1032 行定义.

#define MQTT_SSL_VERSION_TLS_1_2   3

在文件 MQTTAsync.h1033 行定义.

#define MQTTASYNC_0_LEN_WILL_TOPIC   -17

Return code: 0 length will topic

在文件 MQTTAsync.h189 行定义.

#define MQTTASYNC_BAD_MQTT_OPTION   -15

Return code: don't use options for another version of MQTT

在文件 MQTTAsync.h181 行定义.

#define MQTTASYNC_BAD_PROTOCOL   -14

Return code: protocol prefix in serverURI should be tcp://, ssl://, ws:// or wss:// The TLS enabled prefixes (ssl, wss) are only valid if the TLS version of the library is linked with.

在文件 MQTTAsync.h177 行定义.

#define MQTTASYNC_BAD_QOS   -9

Return code: A qos parameter is not 0, 1 or 2

在文件 MQTTAsync.h155 行定义.

#define MQTTASYNC_BAD_STRUCTURE   -8

Return code: A structure parameter does not have the correct eyecatcher and version number.

在文件 MQTTAsync.h151 行定义.

#define MQTTASYNC_BAD_UTF8_STRING   -5

Return code: An invalid UTF-8 string has been detected.

在文件 MQTTAsync.h136 行定义.

#define MQTTAsync_callOptions_initializer   MQTTAsync_responseOptions_initializer

在文件 MQTTAsync.h764 行定义.

#define MQTTASYNC_COMMAND_IGNORED   -18

在文件 MQTTAsync.h195 行定义.

#define MQTTAsync_connectData_initializer   {{'M', 'Q', 'C', 'D'}, 0, NULL, {0, NULL}}

在文件 MQTTAsync.h479 行定义.

#define MQTTAsync_connectOptions_initializer
值:
{ {'M', 'Q', 'T', 'C'}, 8, 60, 1, 65535, NULL, NULL, NULL, 30, 0,\
NULL, NULL, NULL, NULL, 0, NULL, MQTTVERSION_DEFAULT, 0, 1, 60, {0, NULL}, 0, NULL, NULL, NULL, NULL, NULL, NULL, NULL}
#define MQTTVERSION_DEFAULT
Definition: MQTTAsync.h:199

在文件 MQTTAsync.h1358 行定义.

#define MQTTAsync_connectOptions_initializer5
值:
{ {'M', 'Q', 'T', 'C'}, 8, 60, 0, 65535, NULL, NULL, NULL, 30, 0,\
NULL, NULL, NULL, NULL, 0, NULL, MQTTVERSION_5, 0, 1, 60, {0, NULL}, 1, NULL, NULL, NULL, NULL, NULL, NULL, NULL}
#define MQTTVERSION_5
Definition: MQTTAsync.h:211

在文件 MQTTAsync.h1361 行定义.

#define MQTTAsync_connectOptions_initializer5_ws
值:
{ {'M', 'Q', 'T', 'C'}, 8, 45, 0, 65535, NULL, NULL, NULL, 30, 0,\
NULL, NULL, NULL, NULL, 0, NULL, MQTTVERSION_5, 0, 1, 60, {0, NULL}, 1, NULL, NULL, NULL, NULL, NULL, NULL, NULL}
#define MQTTVERSION_5
Definition: MQTTAsync.h:211

在文件 MQTTAsync.h1367 行定义.

#define MQTTAsync_connectOptions_initializer_ws
值:
{ {'M', 'Q', 'T', 'C'}, 8, 45, 1, 65535, NULL, NULL, NULL, 30, 0,\
NULL, NULL, NULL, NULL, 0, NULL, MQTTVERSION_DEFAULT, 0, 1, 60, {0, NULL}, 0, NULL, NULL, NULL, NULL, NULL, NULL, NULL}
#define MQTTVERSION_DEFAULT
Definition: MQTTAsync.h:199

在文件 MQTTAsync.h1364 行定义.

#define MQTTAsync_createOptions_initializer   { {'M', 'Q', 'C', 'O'}, 2, 0, 100, MQTTVERSION_DEFAULT, 0, 0, 1, 1}

在文件 MQTTAsync.h979 行定义.

#define MQTTAsync_createOptions_initializer5   { {'M', 'Q', 'C', 'O'}, 2, 0, 100, MQTTVERSION_5, 0, 0, 1, 1}

在文件 MQTTAsync.h981 行定义.

#define MQTTASYNC_DISCONNECTED   -3

Return code: The client is disconnected.

在文件 MQTTAsync.h127 行定义.

#define MQTTAsync_disconnectOptions_initializer
值:
{ {'M', 'Q', 'T', 'D'}, 0, 0, NULL, NULL, NULL,\
#define MQTTProperties_initializer

在文件 MQTTAsync.h1445 行定义.

#define MQTTAsync_disconnectOptions_initializer5
值:
{ {'M', 'Q', 'T', 'D'}, 1, 0, NULL, NULL, NULL,\
#define MQTTProperties_initializer

在文件 MQTTAsync.h1448 行定义.

#define MQTTASYNC_FAILURE   -1

Return code: A generic error code indicating the failure of an MQTT client operation.

在文件 MQTTAsync.h118 行定义.

#define MQTTAsync_failureData5_initializer   {{'M', 'Q', 'F', 'D'}, 0, 0, MQTTREASONCODE_SUCCESS, MQTTProperties_initializer, 0, NULL, 0}

在文件 MQTTAsync.h557 行定义.

#define MQTTAsync_init_options_initializer   { {'M', 'Q', 'T', 'G'}, 0, 0 }

在文件 MQTTAsync.h231 行定义.

#define MQTTASYNC_MAX_BUFFERED_MESSAGES   -12

Return code: no more messages can be buffered

在文件 MQTTAsync.h167 行定义.

#define MQTTASYNC_MAX_MESSAGES_INFLIGHT   -4

Return code: The maximum number of messages allowed to be simultaneously in-flight has been reached.

在文件 MQTTAsync.h132 行定义.

#define MQTTAsync_message_initializer   { {'M', 'Q', 'T', 'M'}, 1, 0, NULL, 0, 0, 0, 0, MQTTProperties_initializer }

在文件 MQTTAsync.h324 行定义.

#define MQTTASYNC_NO_MORE_MSGIDS   -10

Return code: All 65535 MQTT msgids are being used

在文件 MQTTAsync.h159 行定义.

#define MQTTASYNC_NULL_PARAMETER   -6

Return code: A NULL parameter has been supplied when this is invalid.

在文件 MQTTAsync.h140 行定义.

#define MQTTASYNC_OPERATION_INCOMPLETE   -11

Return code: the request is being discarded when not complete

在文件 MQTTAsync.h163 行定义.

#define MQTTASYNC_PERSISTENCE_ERROR   -2

在文件 MQTTAsync.h122 行定义.

#define MQTTAsync_responseOptions_initializer   { {'M', 'Q', 'T', 'R'}, 1, NULL, NULL, 0, 0, NULL, NULL, MQTTProperties_initializer, MQTTSubscribe_options_initializer, 0, NULL}

在文件 MQTTAsync.h760 行定义.

#define MQTTASYNC_SSL_NOT_SUPPORTED   -13

Return code: Attempting SSL connection using non-SSL version of library

在文件 MQTTAsync.h171 行定义.

#define MQTTAsync_SSLOptions_initializer   { {'M', 'Q', 'T', 'S'}, 5, NULL, NULL, NULL, NULL, NULL, 1, MQTT_SSL_VERSION_DEFAULT, 0, NULL, NULL, NULL, NULL, NULL, 0, NULL, 0 }

在文件 MQTTAsync.h1158 行定义.

#define MQTTASYNC_SUCCESS   0

Return code: No error. Indicates successful completion of an MQTT client operation.

在文件 MQTTAsync.h113 行定义.

#define MQTTAsync_successData5_initializer   {{'M', 'Q', 'S', 'D'}, 0, 0, MQTTREASONCODE_SUCCESS, MQTTProperties_initializer, {.sub={0,0}}}

在文件 MQTTAsync.h630 行定义.

#define MQTTASYNC_TOPICNAME_TRUNCATED   -7

Return code: The topic has been truncated (the topic string includes embedded NULL characters). String functions will not access the full topic. Use the topic length value to access the full topic.

在文件 MQTTAsync.h146 行定义.

#define MQTTASYNC_TRUE   1

Tests whether a request corresponding to a token is complete.

参数
handleA valid client handle from a successful call to MQTTAsync_create().
tokenAn MQTTAsync_token associated with a request.
返回
1 if the request has been completed, 0 if not.

在文件 MQTTAsync.h1616 行定义.

#define MQTTAsync_willOptions_initializer   { {'M', 'Q', 'T', 'W'}, 1, NULL, NULL, 0, 0, { 0, NULL } }

在文件 MQTTAsync.h1028 行定义.

#define MQTTASYNC_WRONG_MQTT_VERSION   -16

Return code: call not applicable to the client's version of MQTT

在文件 MQTTAsync.h185 行定义.

#define MQTTVERSION_3_1   3

MQTT version to connect with: 3.1

在文件 MQTTAsync.h203 行定义.

#define MQTTVERSION_3_1_1   4

MQTT version to connect with: 3.1.1

在文件 MQTTAsync.h207 行定义.

#define MQTTVERSION_5   5

MQTT version to connect with: 5

在文件 MQTTAsync.h211 行定义.

#define MQTTVERSION_DEFAULT   0

Default MQTT version to connect with. Use 3.1.1 then fall back to 3.1

在文件 MQTTAsync.h199 行定义.

类型定义说明

typedef void* MQTTAsync

A handle representing an MQTT client. A valid client handle is available following a successful call to MQTTAsync_create().

在文件 MQTTAsync.h243 行定义.

A synonym for responseOptions to better reflect its usage since MQTT 5.0

在文件 MQTTAsync.h763 行定义.

typedef void MQTTAsync_connected(void *context, char *cause)

This is a callback function, which will be called when the client library successfully connects. This is superfluous when the connection is made in response to a MQTTAsync_connect call, because the onSuccess callback can be used. It is intended for use when automatic reconnect is enabled, so that when a reconnection attempt succeeds in the background, the application is notified and can take any required actions.

Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be called within this callback.

参数
contextA pointer to the context value originally passed to MQTTAsync_setCallbacks(), which contains any application-specific context.
causeThe reason for the disconnection. Currently, cause is always set to NULL.

在文件 MQTTAsync.h420 行定义.

typedef void MQTTAsync_connectionLost(void *context, char *cause)

This is a callback function. The client application must provide an implementation of this function to enable asynchronous notification of the loss of connection to the server. The function is registered with the client library by passing it as an argument to MQTTAsync_setCallbacks(). It is called by the client library if the client loses its connection to the server. The client application must take appropriate action, such as trying to reconnect or reporting the problem. This function is executed on a separate thread to the one on which the client application is running.

Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be called within this callback.

参数
contextA pointer to the context value originally passed to MQTTAsync_setCallbacks(), which contains any application-specific context.
causeThe reason for the disconnection. Currently, cause is always set to NULL.

在文件 MQTTAsync.h402 行定义.

typedef void MQTTAsync_deliveryComplete(void *context, MQTTAsync_token token)

This is a callback function. The client application must provide an implementation of this function to enable asynchronous notification of delivery of messages to the server. The function is registered with the client library by passing it as an argument to MQTTAsync_setCallbacks(). It is called by the client library after the client application has published a message to the server. It indicates that the necessary handshaking and acknowledgements for the requested quality of service (see MQTTAsync_message.qos) have been completed. This function is executed on a separate thread to the one on which the client application is running.

Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be called within this callback.

参数
contextA pointer to the context value originally passed to MQTTAsync_setCallbacks(), which contains any application-specific context.
tokenThe MQTTAsync_token associated with the published message. Applications can check that all messages have been correctly published by matching the tokens returned from calls to MQTTAsync_send() and MQTTAsync_sendMessage() with the tokens passed to this callback.

在文件 MQTTAsync.h382 行定义.

typedef void MQTTAsync_disconnected(void *context, MQTTProperties *properties, enum MQTTReasonCodes reasonCode)

This is a callback function, which will be called when the client library receives a disconnect packet.

Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be called within this callback.

参数
contextA pointer to the context value originally passed to MQTTAsync_setCallbacks(), which contains any application-specific context.
propertiesthe properties in the disconnect packet.
propertiesthe reason code from the disconnect packet Currently, cause is always set to NULL.

在文件 MQTTAsync.h434 行定义.

typedef int MQTTAsync_messageArrived(void *context, char *topicName, int topicLen, MQTTAsync_message *message)

This is a callback function. The client application must provide an implementation of this function to enable asynchronous receipt of messages. The function is registered with the client library by passing it as an argument to MQTTAsync_setCallbacks(). It is called by the client library when a new message that matches a client subscription has been received from the server. This function is executed on a separate thread to the one on which the client application is running.

Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be called within this callback.

参数
contextA pointer to the context value originally passed to MQTTAsync_setCallbacks(), which contains any application-specific context.
topicNameThe topic associated with the received message.
topicLenThe length of the topic if there are one more NULL characters embedded in topicName, otherwise topicLen is 0. If topicLen is 0, the value returned by strlen(topicName) can be trusted. If topicLen is greater than 0, the full topic name can be retrieved by accessing topicName as a byte array of length topicLen.
messageThe MQTTAsync_message structure for the received message. This structure contains the message payload and attributes.
返回
This function must return 0 or 1 indicating whether or not the message has been safely received by the client application.
Returning 1 indicates that the message has been successfully handled. To free the message storage, MQTTAsync_freeMessage must be called. To free the topic name storage, MQTTAsync_free must be called.
Returning 0 indicates that there was a problem. In this case, the client library will reinvoke MQTTAsync_messageArrived() to attempt to deliver the message to the application again. Do not free the message and topic storage when returning 0, otherwise the redelivery will fail.

在文件 MQTTAsync.h359 行定义.

typedef void MQTTAsync_onFailure(void *context, MQTTAsync_failureData *response)

This is a callback function. The client application must provide an implementation of this function to enable asynchronous notification of the unsuccessful completion of an API call. The function is registered with the client library by passing it as an argument in MQTTAsync_responseOptions.

Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be called within this callback.

参数
contextA pointer to the context value originally passed to MQTTAsync_responseOptions, which contains any application-specific context.
responseFailure data associated with the API completion.

在文件 MQTTAsync.h676 行定义.

typedef void MQTTAsync_onFailure5(void *context, MQTTAsync_failureData5 *response)

This is a callback function, the MQTT V5 version of MQTTAsync_onFailure. The application must provide an implementation of this function to enable asynchronous notification of the unsuccessful completion of an API call. The function is registered with the client library by passing it as an argument in MQTTAsync_responseOptions.

Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be called within this callback.

参数
contextA pointer to the context value originally passed to MQTTAsync_responseOptions, which contains any application-specific context.
responseFailure data associated with the API completion.

在文件 MQTTAsync.h691 行定义.

typedef void MQTTAsync_onSuccess(void *context, MQTTAsync_successData *response)

This is a callback function. The client application must provide an implementation of this function to enable asynchronous notification of the successful completion of an API call. The function is registered with the client library by passing it as an argument in MQTTAsync_responseOptions.

Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be called within this callback.

参数
contextA pointer to the context value originally passed to MQTTAsync_responseOptions, which contains any application-specific context.
responseAny success data associated with the API completion.

在文件 MQTTAsync.h645 行定义.

typedef void MQTTAsync_onSuccess5(void *context, MQTTAsync_successData5 *response)

This is a callback function, the MQTT V5 version of MQTTAsync_onSuccess. The client application must provide an implementation of this function to enable asynchronous notification of the successful completion of an API call. The function is registered with the client library by passing it as an argument in MQTTAsync_responseOptions.

Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be called within this callback.

参数
contextA pointer to the context value originally passed to MQTTAsync_responseOptions, which contains any application-specific context.
responseAny success data associated with the API completion.

在文件 MQTTAsync.h661 行定义.

Structure to define call options. For MQTT 5.0 there is input data as well as that describing the response method. So there is now also a synonym MQTTAsync_callOptions to better reflect the use. This responseOptions name is kept for backward compatibility.

typedef int MQTTAsync_token

A value representing an MQTT message. A token is returned to the client application when a message is published. The token can then be used to check that the message was successfully delivered to its destination (see MQTTAsync_publish(), MQTTAsync_publishMessage(), MQTTAsync_deliveryComplete(), and MQTTAsync_getPendingTokens()).

在文件 MQTTAsync.h253 行定义.

typedef void MQTTAsync_traceCallback(enum MQTTASYNC_TRACE_LEVELS level, char *message)

This is a callback function prototype which must be implemented if you want to receive trace information.

参数
levelthe trace level of the message returned
messagethe trace message. This is a pointer to a static buffer which will be overwritten on each call. You must copy the data if you want to keep it for later.

在文件 MQTTAsync.h1705 行定义.

typedef int MQTTAsync_updateConnectOptions(void *context, MQTTAsync_connectData *data)

This is a callback function which will allow the client application to update the connection data.

参数
dataThe connection data which can be modified by the application.
返回
Return a non-zero value to update the connect data, zero to keep the same data.

在文件 MQTTAsync.h487 行定义.

枚举类型说明

枚举值
MQTTASYNC_TRACE_MAXIMUM 
MQTTASYNC_TRACE_MEDIUM 
MQTTASYNC_TRACE_MINIMUM 
MQTTASYNC_TRACE_PROTOCOL 
MQTTASYNC_TRACE_ERROR 
MQTTASYNC_TRACE_SEVERE 
MQTTASYNC_TRACE_FATAL 

在文件 MQTTAsync.h1677 行定义.

函数说明

LIBMQTT_API int MQTTAsync_connect ( MQTTAsync  handle,
const MQTTAsync_connectOptions options 
)

This function attempts to connect a previously-created client (see MQTTAsync_create()) to an MQTT server using the specified options. If you want to enable asynchronous message and status notifications, you must call MQTTAsync_setCallbacks() prior to MQTTAsync_connect().

参数
handleA valid client handle from a successful call to MQTTAsync_create().
optionsA pointer to a valid MQTTAsync_connectOptions structure.
返回
MQTTASYNC_SUCCESS if the client connect request was accepted. If the client was unable to connect to the server, an error code is returned via the onFailure callback, if set. Error codes greater than 0 are returned by the MQTT protocol:

1: Connection refused: Unacceptable protocol version
2: Connection refused: Identifier rejected
3: Connection refused: Server unavailable
4: Connection refused: Bad user name or password
5: Connection refused: Not authorized
6-255: Reserved for future use
LIBMQTT_API int MQTTAsync_create ( MQTTAsync handle,
const char *  serverURI,
const char *  clientId,
int  persistence_type,
void *  persistence_context 
)

This function creates an MQTT client ready for connection to the specified server and using the specified persistent storage (see MQTTAsync_persistence). See also MQTTAsync_destroy().

参数
handleA pointer to an MQTTAsync handle. The handle is populated with a valid client reference following a successful return from this function.
serverURIA null-terminated string specifying the server to which the client will connect. It takes the form protocol://host:port. protocol must be tcp, ssl, ws or wss. The TLS enabled prefixes (ssl, wss) are only valid if a TLS version of the library is linked with. For host, you can specify either an IP address or a host name. For instance, to connect to a server running on the local machines with the default MQTT port, specify tcp://localhost:1883.
clientIdThe client identifier passed to the server when the client connects to it. It is a null-terminated UTF-8 encoded string.
persistence_typeThe type of persistence to be used by the client:
MQTTCLIENT_PERSISTENCE_NONE: Use in-memory persistence. If the device or system on which the client is running fails or is switched off, the current state of any in-flight messages is lost and some messages may not be delivered even at QoS1 and QoS2.
MQTTCLIENT_PERSISTENCE_DEFAULT: Use the default (file system-based) persistence mechanism. Status about in-flight messages is held in persistent storage and provides some protection against message loss in the case of unexpected failure.
MQTTCLIENT_PERSISTENCE_USER: Use an application-specific persistence implementation. Using this type of persistence gives control of the persistence mechanism to the application. The application has to implement the MQTTClient_persistence interface.
persistence_contextIf the application uses MQTTCLIENT_PERSISTENCE_NONE persistence, this argument is unused and should be set to NULL. For MQTTCLIENT_PERSISTENCE_DEFAULT persistence, it should be set to the location of the persistence directory (if set to NULL, the persistence directory used is the working directory). Applications that use MQTTCLIENT_PERSISTENCE_USER persistence set this argument to point to a valid MQTTClient_persistence structure.
返回
MQTTASYNC_SUCCESS if the client is successfully created, otherwise an error code is returned.
LIBMQTT_API int MQTTAsync_createWithOptions ( MQTTAsync handle,
const char *  serverURI,
const char *  clientId,
int  persistence_type,
void *  persistence_context,
MQTTAsync_createOptions options 
)
LIBMQTT_API void MQTTAsync_destroy ( MQTTAsync handle)

This function frees the memory allocated to an MQTT client (see MQTTAsync_create()). It should be called when the client is no longer required.

参数
handleA pointer to the handle referring to the MQTTAsync structure to be freed.
LIBMQTT_API int MQTTAsync_disconnect ( MQTTAsync  handle,
const MQTTAsync_disconnectOptions options 
)

This function attempts to disconnect the client from the MQTT server. In order to allow the client time to complete handling of messages that are in-flight when this function is called, a timeout period is specified. When the timeout period has expired, the client disconnects even if there are still outstanding message acknowledgements. The next time the client connects to the same server, any QoS 1 or 2 messages which have not completed will be retried depending on the cleansession settings for both the previous and the new connection (see MQTTAsync_connectOptions.cleansession and MQTTAsync_connect()).

参数
handleA valid client handle from a successful call to MQTTAsync_create().
optionsThe client delays disconnection for up to this time (in milliseconds) in order to allow in-flight message transfers to complete.
返回
MQTTASYNC_SUCCESS if the client successfully disconnects from the server. An error code is returned if the client was unable to disconnect from the server
LIBMQTT_API void MQTTAsync_free ( void *  ptr)

This function frees memory allocated by the MQTT C client library, especially the topic name. This is needed on Windows when the client library and application program have been compiled with different versions of the C compiler. It is thus good policy to always use this function when freeing any MQTT C client- allocated memory.

参数
ptrThe pointer to the client library storage to be freed.
LIBMQTT_API void MQTTAsync_freeMessage ( MQTTAsync_message **  msg)

This function frees memory allocated to an MQTT message, including the additional memory allocated to the message payload. The client application calls this function when the message has been fully processed. Important note: This function does not free the memory allocated to a message topic string. It is the responsibility of the client application to free this memory using the MQTTAsync_free() library function.

参数
msgThe address of a pointer to the MQTTAsync_message structure to be freed.
LIBMQTT_API int MQTTAsync_getPendingTokens ( MQTTAsync  handle,
MQTTAsync_token **  tokens 
)

This function sets a pointer to an array of tokens for messages that are currently in-flight (pending completion).

Important note: The memory used to hold the array of tokens is malloc()'d in this function. The client application is responsible for freeing this memory when it is no longer required.

参数
handleA valid client handle from a successful call to MQTTAsync_create().
tokensThe address of a pointer to an MQTTAsync_token. When the function returns successfully, the pointer is set to point to an array of tokens representing messages pending completion. The last member of the array is set to -1 to indicate there are no more tokens. If no tokens are pending, the pointer is set to NULL.
返回
MQTTASYNC_SUCCESS if the function returns successfully. An error code is returned if there was a problem obtaining the list of pending tokens.
LIBMQTT_API MQTTAsync_nameValue* MQTTAsync_getVersionInfo ( void  )

This function returns version information about the library. no trace information will be returned. The default trace level is MQTTASYNC_TRACE_MINIMUM

返回
an array of strings describing the library. The last entry is a NULL pointer.
LIBMQTT_API void MQTTAsync_global_init ( MQTTAsync_init_options inits)

Global init of mqtt library. Call once on program start to set global behaviour. handle_openssl_init - if mqtt library should handle openssl init (1) or rely on the caller to init it before using mqtt (0)

LIBMQTT_API int MQTTAsync_isComplete ( MQTTAsync  handle,
MQTTAsync_token  token 
)
LIBMQTT_API int MQTTAsync_isConnected ( MQTTAsync  handle)

This function allows the client application to test whether or not a client is currently connected to the MQTT server.

参数
handleA valid client handle from a successful call to MQTTAsync_create().
返回
Boolean true if the client is connected, otherwise false.
LIBMQTT_API void* MQTTAsync_malloc ( size_t  size)

This function is used to allocate memory to be used or freed by the MQTT C client library, especially the data in the MQTTPersistence_afterRead and MQTTPersistence_beforeWrite callbacks. This is needed on Windows when the client library and application program have been compiled with different versions of the C compiler.

参数
sizeThe size of the memory to be allocated.
LIBMQTT_API int MQTTAsync_reconnect ( MQTTAsync  handle)

Reconnects a client with the previously used connect options. Connect must have previously been called for this to work.

参数
handleA valid client handle from a successful call to MQTTAsync_create().
返回
MQTTASYNC_SUCCESS if the callbacks were correctly set, MQTTASYNC_FAILURE if an error occurred.
LIBMQTT_API int MQTTAsync_send ( MQTTAsync  handle,
const char *  destinationName,
int  payloadlen,
const void *  payload,
int  qos,
int  retained,
MQTTAsync_responseOptions response 
)

This function attempts to publish a message to a given topic (see also MQTTAsync_sendMessage()). An MQTTAsync_token is issued when this function returns successfully if the QoS is greater than 0. If the client application needs to test for successful delivery of messages, a callback should be set (see MQTTAsync_onSuccess() and MQTTAsync_deliveryComplete()).

参数
handleA valid client handle from a successful call to MQTTAsync_create().
destinationNameThe topic associated with this message.
payloadlenThe length of the payload in bytes.
payloadA pointer to the byte array payload of the message.
qosThe qos of the message.
retainedThe retained flag for the message.
responseA pointer to an MQTTAsync_responseOptions structure. Used to set callback functions. This is optional and can be set to NULL.
返回
MQTTASYNC_SUCCESS if the message is accepted for publication. An error code is returned if there was a problem accepting the message.
LIBMQTT_API int MQTTAsync_sendMessage ( MQTTAsync  handle,
const char *  destinationName,
const MQTTAsync_message msg,
MQTTAsync_responseOptions response 
)

This function attempts to publish a message to a given topic (see also MQTTAsync_publish()). An MQTTAsync_token is issued when this function returns successfully if the QoS is greater than 0. If the client application needs to test for successful delivery of messages, a callback should be set (see MQTTAsync_onSuccess() and MQTTAsync_deliveryComplete()).

参数
handleA valid client handle from a successful call to MQTTAsync_create().
destinationNameThe topic associated with this message.
msgA pointer to a valid MQTTAsync_message structure containing the payload and attributes of the message to be published.
responseA pointer to an MQTTAsync_responseOptions structure. Used to set callback functions.
返回
MQTTASYNC_SUCCESS if the message is accepted for publication. An error code is returned if there was a problem accepting the message.
LIBMQTT_API int MQTTAsync_setAfterPersistenceRead ( MQTTAsync  handle,
void *  context,
MQTTPersistence_afterRead co 
)

Sets the MQTTPersistence_afterRead() callback function for a client.

参数
handleA valid client handle from a successful call to MQTTAsync_create().
contextA pointer to any application-specific context. The the context pointer is passed to the callback function to provide access to the context information in the callback.
coA pointer to an MQTTPersistence_beforeWrite() callback function. NULL removes the callback setting.
LIBMQTT_API int MQTTAsync_setBeforePersistenceWrite ( MQTTAsync  handle,
void *  context,
MQTTPersistence_beforeWrite co 
)

Sets the MQTTPersistence_beforeWrite() callback function for a client.

参数
handleA valid client handle from a successful call to MQTTAsync_create().
contextA pointer to any application-specific context. The the context pointer is passed to the callback function to provide access to the context information in the callback.
coA pointer to an MQTTPersistence_beforeWrite() callback function. NULL removes the callback setting.
LIBMQTT_API int MQTTAsync_setCallbacks ( MQTTAsync  handle,
void *  context,
MQTTAsync_connectionLost cl,
MQTTAsync_messageArrived ma,
MQTTAsync_deliveryComplete dc 
)

This function sets the global callback functions for a specific client. If your client application doesn't use a particular callback, set the relevant parameter to NULL. Any necessary message acknowledgements and status communications are handled in the background without any intervention from the client application. If you do not set a messageArrived callback function, you will not be notified of the receipt of any messages as a result of a subscription.

Note: The MQTT client must be disconnected when this function is called.

参数
handleA valid client handle from a successful call to MQTTAsync_create().
contextA pointer to any application-specific context. The the context pointer is passed to each of the callback functions to provide access to the context information in the callback.
clA pointer to an MQTTAsync_connectionLost() callback function. You can set this to NULL if your application doesn't handle disconnections.
maA pointer to an MQTTAsync_messageArrived() callback function. If this callback is not set, an error will be returned. You must set this callback because otherwise there would be no way to deliver any incoming messages.
dcA pointer to an MQTTAsync_deliveryComplete() callback function. You can set this to NULL if you do not want to check for successful delivery.
返回
MQTTASYNC_SUCCESS if the callbacks were correctly set, MQTTASYNC_FAILURE if an error occurred.
LIBMQTT_API int MQTTAsync_setConnected ( MQTTAsync  handle,
void *  context,
MQTTAsync_connected co 
)

Sets the MQTTAsync_connected() callback function for a client.

参数
handleA valid client handle from a successful call to MQTTAsync_create().
contextA pointer to any application-specific context. The the context pointer is passed to each of the callback functions to provide access to the context information in the callback.
coA pointer to an MQTTAsync_connected() callback function. NULL removes the callback setting.
返回
MQTTASYNC_SUCCESS if the callbacks were correctly set, MQTTASYNC_FAILURE if an error occurred.
LIBMQTT_API int MQTTAsync_setConnectionLostCallback ( MQTTAsync  handle,
void *  context,
MQTTAsync_connectionLost cl 
)

This function sets the callback function for a connection lost event for a specific client. Any necessary message acknowledgements and status communications are handled in the background without any intervention from the client application.

Note: The MQTT client must be disconnected when this function is called.

参数
handleA valid client handle from a successful call to MQTTAsync_create().
contextA pointer to any application-specific context. The the context pointer is passed the callback functions to provide access to the context information in the callback.
clA pointer to an MQTTAsync_connectionLost() callback function. You can set this to NULL if your application doesn't handle disconnections.
返回
MQTTASYNC_SUCCESS if the callbacks were correctly set, MQTTASYNC_FAILURE if an error occurred.
LIBMQTT_API int MQTTAsync_setDeliveryCompleteCallback ( MQTTAsync  handle,
void *  context,
MQTTAsync_deliveryComplete dc 
)

This function sets the callback function for a delivery complete event for a specific client. Any necessary message acknowledgements and status communications are handled in the background without any intervention from the client application.

Note: The MQTT client must be disconnected when this function is called.

参数
handleA valid client handle from a successful call to MQTTAsync_create().
contextA pointer to any application-specific context. The the context pointer is passed to the callback functions to provide access to the context information in the callback.
dcA pointer to an MQTTAsync_deliveryComplete() callback function. You can set this to NULL if you do not want to check for successful delivery.
返回
MQTTASYNC_SUCCESS if the callbacks were correctly set, MQTTASYNC_FAILURE if an error occurred.
LIBMQTT_API int MQTTAsync_setDisconnected ( MQTTAsync  handle,
void *  context,
MQTTAsync_disconnected co 
)

Sets the MQTTAsync_disconnected() callback function for a client.

参数
handleA valid client handle from a successful call to MQTTAsync_create().

Note: Neither MQTTAsync_create() nor MQTTAsync_destroy() should be called within this callback.

参数
contextA pointer to any application-specific context. The the context pointer is passed to each of the callback functions to provide access to the context information in the callback.
coA pointer to an MQTTAsync_connected() callback function. NULL removes the callback setting.
返回
MQTTASYNC_SUCCESS if the callbacks were correctly set, MQTTASYNC_FAILURE if an error occurred.
LIBMQTT_API int MQTTAsync_setMessageArrivedCallback ( MQTTAsync  handle,
void *  context,
MQTTAsync_messageArrived ma 
)

This function sets the callback function for a message arrived event for a specific client. Any necessary message acknowledgements and status communications are handled in the background without any intervention from the client application. If you do not set a messageArrived callback function, you will not be notified of the receipt of any messages as a result of a subscription.

Note: The MQTT client must be disconnected when this function is called.

参数
handleA valid client handle from a successful call to MQTTAsync_create().
contextA pointer to any application-specific context. The the context pointer is passed to the callback functions to provide access to the context information in the callback.
maA pointer to an MQTTAsync_messageArrived() callback function. You can set this to NULL if your application doesn't handle receipt of messages.
返回
MQTTASYNC_SUCCESS if the callbacks were correctly set, MQTTASYNC_FAILURE if an error occurred.
LIBMQTT_API void MQTTAsync_setTraceCallback ( MQTTAsync_traceCallback callback)

This function sets the trace callback if needed. If set to NULL, no trace information will be returned. The default trace level is MQTTASYNC_TRACE_MINIMUM.

参数
callbacka pointer to the function which will handle the trace information
LIBMQTT_API void MQTTAsync_setTraceLevel ( enum MQTTASYNC_TRACE_LEVELS  level)

This function sets the level of trace information which will be returned in the trace callback.

参数
levelthe trace level required
LIBMQTT_API int MQTTAsync_setUpdateConnectOptions ( MQTTAsync  handle,
void *  context,
MQTTAsync_updateConnectOptions co 
)

Sets the MQTTAsync_updateConnectOptions() callback function for a client.

参数
handleA valid client handle from a successful call to MQTTAsync_create().
contextA pointer to any application-specific context. The the context pointer is passed to each of the callback functions to provide access to the context information in the callback.
coA pointer to an MQTTAsync_updateConnectOptions() callback function. NULL removes the callback setting.
LIBMQTT_API const char* MQTTAsync_strerror ( int  code)

Returns a pointer to a string representation of the error code, or NULL. Do not free after use. Returns NULL if the error code is unknown.

参数
codethe MQTTASYNC_ return code.
返回
a static string representation of the error code.
LIBMQTT_API int MQTTAsync_subscribe ( MQTTAsync  handle,
const char *  topic,
int  qos,
MQTTAsync_responseOptions response 
)

This function attempts to subscribe a client to a single topic, which may contain wildcards (see wildcard). This call also specifies the qos requested for the subscription (see also MQTTAsync_subscribeMany()).

参数
handleA valid client handle from a successful call to MQTTAsync_create().
topicThe subscription topic, which may include wildcards.
qosThe requested quality of service for the subscription.
responseA pointer to a response options structure. Used to set callback functions.
返回
MQTTASYNC_SUCCESS if the subscription request is successful. An error code is returned if there was a problem registering the subscription.
LIBMQTT_API int MQTTAsync_subscribeMany ( MQTTAsync  handle,
int  count,
char *const *  topic,
const int *  qos,
MQTTAsync_responseOptions response 
)

This function attempts to subscribe a client to a list of topics, which may contain wildcards (see wildcard). This call also specifies the qos requested for each topic (see also MQTTAsync_subscribe()).

参数
handleA valid client handle from a successful call to MQTTAsync_create().
countThe number of topics for which the client is requesting subscriptions.
topicAn array (of length count) of pointers to topics, each of which may include wildcards.
qosAn array (of length count) of qos values. qos[n] is the requested QoS for topic[n].
responseA pointer to a response options structure. Used to set callback functions.
返回
MQTTASYNC_SUCCESS if the subscription request is successful. An error code is returned if there was a problem registering the subscriptions.
LIBMQTT_API int MQTTAsync_unsubscribe ( MQTTAsync  handle,
const char *  topic,
MQTTAsync_responseOptions response 
)

This function attempts to remove an existing subscription made by the specified client.

参数
handleA valid client handle from a successful call to MQTTAsync_create().
topicThe topic for the subscription to be removed, which may include wildcards (see wildcard).
responseA pointer to a response options structure. Used to set callback functions.
返回
MQTTASYNC_SUCCESS if the subscription is removed. An error code is returned if there was a problem removing the subscription.
LIBMQTT_API int MQTTAsync_unsubscribeMany ( MQTTAsync  handle,
int  count,
char *const *  topic,
MQTTAsync_responseOptions response 
)

This function attempts to remove existing subscriptions to a list of topics made by the specified client.

参数
handleA valid client handle from a successful call to MQTTAsync_create().
countThe number subscriptions to be removed.
topicAn array (of length count) of pointers to the topics of the subscriptions to be removed, each of which may include wildcards.
responseA pointer to a response options structure. Used to set callback functions.
返回
MQTTASYNC_SUCCESS if the subscriptions are removed. An error code is returned if there was a problem removing the subscriptions.
LIBMQTT_API int MQTTAsync_waitForCompletion ( MQTTAsync  handle,
MQTTAsync_token  token,
unsigned long  timeout 
)

Waits for a request corresponding to a token to complete. This only works for messages with QoS greater than 0. A QoS 0 message has no MQTT token. This function will always return MQTTASYNC_SUCCESS for a QoS 0 message.

参数
handleA valid client handle from a successful call to MQTTAsync_create().
tokenAn MQTTAsync_token associated with a request.
timeoutthe maximum time to wait for completion, in milliseconds
返回
MQTTASYNC_SUCCESS if the request has been completed in the time allocated, MQTTASYNC_FAILURE or MQTTASYNC_DISCONNECTED if not.